Ronal Wheel Fitting Kit – T3 / 2WD / Radius Seat
10 studs, 10 conversion studs, 20 nuts, threadlock
Please fill in the information along with your question below and we will get back to you as soon as possible.
Product Question
Details
A fitting kit comprising conversion studs and nuts to fit Ronal alloy wheels to a 2WD T3.
We say 2WD as for a Syncro you wont need the conversion studs or thread lock as you already have studs on the front.
Ronal supply these wheels as standar with a fitting kit that contains M14 nuts and bolts but they have a 17mm head which isn’t correct and wont match your existing wheel brace.
This kit contains the correct fittings with the origina 19mm head.
Also note that Ronal say you can fit these with the standard rear wheel studs. We’re not saying they’re wrong… but the rear studs are very short and only allow approx 6 turns of a nut which is less than we consider correct (absolute minimum is 3/4 engagement which on an M14 stud with 1.5mm thread pitch is 7 turns… so we include longer rear studs in this kit.
It’s up to you what you do.
Its a configurable kit so if you don’t need all the components just adjust the quantities in the list to suit.
Please note that this is just a kit of parts that can be found seperately on the webshop elsewhere. If any are out of stock they wont be added to your cart.
Once added, the price will be calculated.
Zinc plated nuts with stainless steel caps. Very similar to those used on factory allow wheel fitment.
Additional Information
Our Part No.
T3WFKRONAL
Manufacturer
Kit
This kit consists of the following individual parts:
PLEASE NOTE: If any of the items in the kit have a QTY of 0 they are unfortunately out of stock and will not be delivered if ordered.
