Indicator Stalk – T3 / Cruise Control

Details

Replacement indicator stalk to fit the T3 models. Suitable for wiring to the ECU for TDI and GTI conversions.

Please read the description in full before ordering. This is not a straightforward fit, however as it is the only stalk available that is remotely similar to the original T3 stalk, we consider it a worthwile addition to our stock.

Firstly, the angle of the stalk is different to the T3 original.
This will position the end of the stalks at around the 10 o’clock position rather than the 9 o’clock position.

Next, the stalk is shorter, it’s around 20mm shorter than the original.
Not a big issue in reality and actually an advantage if you run a smaller than standard steering wheel and not actually that bad with a standard wheel especially if you have a Power Steering wheel fitted.

There is no provision for a horn contact. However, the mounting to fit one exists.
It is possible to remove the contact from your existing stalks and carefully fit it to these stalks as the blank hole is there.

Lastly this is a stalk for an airbag equiped vehicle. it has 3 extra mounting tangs on the outside if the metal section.
You’ll need to cut these off and ideally file away the sharp edges.

As we say, not straightforward fit, but if you want an original looking cruise control stalk for your GTI/TDI/Whatever conversion… this is it.

Additional Information

20 in stock